Introduzione

When a car is driven, tires tend to wear unevenly. To extend the life of tires, it is important to rotate the tires every 30,000 miles. This guide will show you how to remove and rotate tires.

Strumenti

Parti

Nessuna parte richiesta.

Turn car off and remove keys from ignition.
  • Turn car off and remove keys from ignition.

  • Place car in park (automatic) or neutral (manual).

  • Engage parking brake.

Aggiungi Commento

Use hydraulic jack on frame of car to raise car.
  • Use hydraulic jack on frame of car to raise car.

  • Place jack head underneath frame of car.

  • Only necessary to jack the car until the wheels are just off the ground.

Aggiungi Commento

  • Place jack stand on frame of car and remove jack.

  • Do no work under car supported only by hydraulic jack, serious injury or death may occur.

Aggiungi Commento

  • Turn car off and remove keys from ignition.

  • Place car in park (automatic) or neutral (manual).

  • Engage parking brake.

Aggiungi Commento

  • Use hydraulic jack on frame of car to raise car.

  • Place jack head underneath frame couple (pictured).

  • Only necessary to jack the car until the wheels are just off the ground.

Aggiungi Commento

  • Place jack stand on frame of car and remove jack.

  • Do not work under car supported only by hydraulic jack, serious injury or death may result.

Aggiungi Commento

  • Pry off the all four hub caps by placing a small flathead screwdriver between hubcap and rim pulling the screwdriver away from tire.

  • Pull hubcaps away from tires.

Aggiungi Commento

  • Loosen each of the five lug nuts on all tires by turning them counter-clockwise with a 19mm wrench.

Aggiungi Commento

  • Remove tires by pulling directly away from car exposing brake rotors.

Aggiungi Commento

  • Swap tires according to diagram.

Aggiungi Commento

  • Place tires on axels.

  • Hand tighten the lug nuts with narrow end of nut towards car.

  • Finish tightening the lug nuts with 19mm Torque Wrench to a torque of 63 lb*ft.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 3-28, Regan Fall 2010 Membro di Cal Poly, Team 3-28, Regan Fall 2010

CPSU-REGAN-F10S3G28

4 Membri

9 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 2,315