Salta al contenuto principale

1967-68 Mustang Kick Panel Speaker Replacement

Cosa ti serve

  1. 1967-68 Mustang Kick Panel Speaker Replacement, Kick Panel Speaker: passo 1, immagine 1 di 2 1967-68 Mustang Kick Panel Speaker Replacement, Kick Panel Speaker: passo 1, immagine 2 di 2
    • Find the car battery under the hood.

    • On the battery locate the black negative battery terminal.

    • Next unscrew the knob on the disconnect.

    • Lastly move the negative lead away from the batter terminal.

    • Make sure not to cross the battery leads.

  2. 1967-68 Mustang Kick Panel Speaker Replacement: passo 2, immagine 1 di 1
    • Locate the kick panel speaker that needs to be replaced.

  3. 1967-68 Mustang Kick Panel Speaker Replacement: passo 3, immagine 1 di 1
    • Locate the two top screws as well as the two bottom screws for the speaker.

    • Check the kind of screws that were used to hold the speaker in place.

  4. 1967-68 Mustang Kick Panel Speaker Replacement: passo 4, immagine 1 di 3 1967-68 Mustang Kick Panel Speaker Replacement: passo 4, immagine 2 di 3 1967-68 Mustang Kick Panel Speaker Replacement: passo 4, immagine 3 di 3
    • You are now ready to start replacing the speaker.

    • A philips head screwdriver will be needed.

    • Do not use a socket in this situation because it may mess up the speaker guard.

    • Lastly make sure to remove the screw completely without stripping out the screw hole.

  5. 1967-68 Mustang Kick Panel Speaker Replacement: passo 5, immagine 1 di 3 1967-68 Mustang Kick Panel Speaker Replacement: passo 5, immagine 2 di 3 1967-68 Mustang Kick Panel Speaker Replacement: passo 5, immagine 3 di 3
    • The speaker guard and speaker are now ready to be removed.

    • Be careful when removing the speaker. Do not pull the wires tight.

  6. 1967-68 Mustang Kick Panel Speaker Replacement: passo 6, immagine 1 di 2 1967-68 Mustang Kick Panel Speaker Replacement: passo 6, immagine 2 di 2
    • Locate the wires on the back of the broken speaker.

    • Remove both the positive and negative wires.

  7. 1967-68 Mustang Kick Panel Speaker Replacement: passo 7, immagine 1 di 2 1967-68 Mustang Kick Panel Speaker Replacement: passo 7, immagine 2 di 2
    • Now locate the new speaker.

    • Slide the positive and negative wires onto the speaker terminals.

  8. 1967-68 Mustang Kick Panel Speaker Replacement: passo 8, immagine 1 di 3 1967-68 Mustang Kick Panel Speaker Replacement: passo 8, immagine 2 di 3 1967-68 Mustang Kick Panel Speaker Replacement: passo 8, immagine 3 di 3
    • Place the speaker back into the kick panel housing.

    • Line up the speaker holes with the existing holes in the kick panel.

    • Be careful not to pinch the speaker wires.

    • This would be a good time to replace the speaker wires if needed

  9. 1967-68 Mustang Kick Panel Speaker Replacement: passo 9, immagine 1 di 2 1967-68 Mustang Kick Panel Speaker Replacement: passo 9, immagine 2 di 2
    • Place the speaker guard back over the speaker.

    • Screw in all four screws

    • Do not over tighten the screws or the holes will strip out.

  10. 1967-68 Mustang Kick Panel Speaker Replacement: passo 10, immagine 1 di 2 1967-68 Mustang Kick Panel Speaker Replacement: passo 10, immagine 2 di 2
    • Reconnect the negative battery terminal.

    • Screw the knob until it is snug.

Conclusione

You have now replaced the speaker.

Un'altra persona ha completato questa guida.

John

Membro da: 09/29/15

101 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 15-7, Green Fall 2015 Membro di Cal Poly, Team 15-7, Green Fall 2015

CPSU-GREEN-F15S15G7

3 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 15

Tutti i Tempi: 1,646