Salta al contenuto principale

01 | XY Frame Assembly

Cosa ti serve

  1. 01 | XY Frame Assembly, 01 | XY Frame Assembly: passo 1, immagine 1 di 3 01 | XY Frame Assembly, 01 | XY Frame Assembly: passo 1, immagine 2 di 3 01 | XY Frame Assembly, 01 | XY Frame Assembly: passo 1, immagine 3 di 3
    • M8 x 40 screw for each corner. Insert T Nuts before M8 screws and do not tighten them now. Just to keep the frame in shape.

    • Blind L metal brackets for Z axis assembly should be inserted before M8 screws as well.

    • There are M8 holes for Z axis assembly on the 320mm aluminium extrusions which should be at the back of the XY Frame. Larger hole should be faced to bottom.

    • Insert two T-nuts for every corner in order to fasten the L brackets on the next step.

    • Do not forget to insert T Nuts for Y motor holder in back and LCD mount in front.

  2. 01 | XY Frame Assembly: passo 2, immagine 1 di 3 01 | XY Frame Assembly: passo 2, immagine 2 di 3 01 | XY Frame Assembly: passo 2, immagine 3 di 3
    • One Metal L Brackets for each corner.

    • Two M6x12 socket cap screws for each metal L brackets.

    • Please align the extrusions on a flat surface like glass or marble and then tighten the M8 screws on the corners and the inside L brackets.

    • T-Nut insert for each bottom corner.

    • Printed Zaribo L brackets.

    • Misumi rubber foot for each corner.

    • M6x20 socket cap screw.

    • Misumi 3030 aluminium extrusion edge cover.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

Murathan Araz

Membro da: 08/01/13

735 Reputazione

4 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 18

Tutti i Tempi: 3,079