Salta al contenuto principale

Second generation of CDMA iPad 2 with 16, 32, or 64 GB and Dual Core A5 Processor. Model Number A1397. Repair is detailed and requires heat and prying.

52 Domande Visualizza tutte

Orientation of on/off switch, button and cable

I'm working on an iPad 2 that was dropped. The drop requires the replacement of the volume control, on/off ribbon cable.

I've got most of the ribbon cable installed but am stuck at the on/off switch and need to know the correct orientation of the metal switch plate and button.

I have the button installed on the plate correctly but am not sure if the ribbon feeds from the top or bottom. Also, the button can go in two different ways-the metal piece on the back of the button has a plastic stop. Should it stop the metal piece from hitting the bottom or top of the case.

Thanks,

Ed

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio -1
Aggiungi un commento

1 Risposta

Soluzione Prescelta

Block Image

I just replaced the back and digitizer to an ipad 2, here is the best picture I took of the ribbon. Hope this helps (if it isnt too late!)

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

dredison sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,265