Aggiusta la tua roba Comunità Store

Lanciato a giugno 2012. Modello A1278. Processore Intel con Turbo Boost. Fino a 512 MB di RAM Video DDR5

1624 Domande Visualizza tutte

Opzioni

Need to re-solder some Resistors & Capacitors - Water damage

Hello, my friend gift me her MacBook Pro mid 2012 13" water damaged.

(Magsafe blinking light - no power on)

I have checked and cleaned the logic board but there are missing the following:

  • R 5369
  • R 5099
  • R 5053
  • R 5076
  • C 4905
  • C 4910

Where can I buy ? How can I understand the value of parts?

Thanks

Update (11/07/2017)

Also missing - ARE THEY REALLY NECESSARY?

  • R 5339
  • R 5349
  • R 5290
  • R 5001
  • R 5024
  • R 5023
  • C 7408
  • C 7414
  • C 7415
  • C 7416
  • C 5520
  • R 5021
  • C 7419
  • C 7418
  • C 1675
  • C 1673
  • C 1674
  • C 1671

How can this system have worked if all those parts are missing?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

2 Risposte

Filtra per:
Più utili Più recenti Più Vecchio
Soluzione Prescelta

Opzioni

Those parts are there for a reason. You can do without some of those capacitors but you NEED all the resistors! You can get the values on the schematic but it would be better to buy a donor board to steal the components off of. Look for your 820- number but I already know yours is a 820-3115 and get one from china. They are cheap then just steal what you need off the other board. You will need a hot air station and a microscope.

Questa risposta è stata utile?

Sì No
Punteggio 3

1 Commento:

Thank You so much :)

da

Aggiungi un commento
Risposta Più Utile

Opzioni

download this schematic https://mega.nz/#!eggVQTSQ!h-bKyiA8hM_ka.... open it with acrobat reader dc and it will let you search for the components and tell you the values

Questa risposta è stata utile?

Sì No
Punteggio 4

3 Commenti:

Thanks for fast reply!

I have booted this Mac two days ago ( in SMC bypass). And it has Booted normally after I had used a new magsafe. But just one normal boot - now I have blinking Magsafe led and no Power.

Is it possible that my MBP model don't need all those missing capacitors?

Thanks

da

did you try disconnecting and reconnecting the battery

da

yes, also changed Magsafe and DC In Board. Tried any key combination and Smc reset via command line (when I was able to Boot via Smc bypass)...nothing.

da

Aggiungi un commento

Aggiungi la tua risposta

LORIS GIAMMARINO sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 146