Midea MRU03M2ABB Upright Freezer Door Replacement

Introduzione

This guide helps you to replace the door of the Midea MRU03M2ABB Upright Freezer. You can look for replacement parts and accessories on the Midea website.

In the world of appliance maintenance, I understand the importance of precision and accuracy. A damaged or malfunctioning freezer door can compromise the efficiency of your appliance, leading to potential energy wastage and diminished performance.

Before embarking on this task, I recommend familiarizing yourself with the provided steps, as well as ensuring you have the necessary tools and replacement parts in hand.

Let's get started!

Cosa ti serve

Passo 1 Door

Midea MRU03M2ABB Upright Freezer Door Replacement, Door: passo 1, immagine 1 di 2

Midea MRU03M2ABB Upright Freezer Door Replacement, Door: passo 1, immagine 2 di 2

Unplug the device.
Only unplug when your hand is dry.

Modifica

Passo 2

Empty the shelves.

Modifica

Passo 3

Midea MRU03M2ABB Upright Freezer Door Replacement: passo 3, immagine 3 di 3

Use a plastic spatula to remove the hinge cover on top of the freezer.
Pushing at the pointy part of the cover makes it easier to remove.

Modifica

Passo 4

Midea MRU03M2ABB Upright Freezer Door Replacement: passo 4, immagine 3 di 3

Unscrew the hinge counterclockwise.

Modifica

Passo 5

Lift the hinge out of the freezer and the door.

Modifica

Passo 6

Midea MRU03M2ABB Upright Freezer Door Replacement: passo 6, immagine 3 di 3

With two hands, gently hold and open the door as usual.
Lift the door up to remove it from the bottom hinge.
You have completely detached the door from the freezer.

Modifica

Passo 7

Midea MRU03M2ABB Upright Freezer Door Replacement: passo 7, immagine 3 di 3

With the new door, locate the hole underneath the door.
Using two hands, gently place the door on top of the hinge (the pointy part of the hinge should fit inside the hole).
Close the door.

Modifica

Passo 8

Midea MRU03M2ABB Upright Freezer Door Replacement: passo 8, immagine 3 di 3

Use your hand to align the door so these three screw holes stay on the same line.
Carefully place the top hinge to fit these holes.

Modifica

Passo 9

Thread and tighten the screws clockwise.

Modifica

Passo 10

Gently swing the door to make sure it operates well.

Modifica

Passo 11

Finally, firmly press the cover onto the hinge to secure it. Now, you have completely replaced the door.
A "click" will indicate that the cover is finally in its place.

Modifica