Salta al contenuto principale

How to Repair a Warped Sterling Silver Ring

Cosa ti serve

  1. How to Repair a Warped Sterling Silver Ring, How to Repair a Warped Sterling Silver Ring: passo 1, immagine 1 di 1
    • Fill a cooking pot halfway full with water.

  2. How to Repair a Warped Sterling Silver Ring: passo 2, immagine 1 di 2 How to Repair a Warped Sterling Silver Ring: passo 2, immagine 2 di 2
    • Place the pot with water on the stove.

    • Turn the stove burner on to medium heat.

    • Using a stove can cause burns. Be sure to watch where you place your hands or if there are people around who may accidentally be burned.

    • Gas stoves can expose excess gas into your house when they are not lit properly and can lead to unconsciousness or serious injuries.

  3. How to Repair a Warped Sterling Silver Ring: passo 3, immagine 1 di 2 How to Repair a Warped Sterling Silver Ring: passo 3, immagine 2 di 2
    • Boil the water until it starts steaming.

    • Use tongs to hold the ring and place it in the steaming water.

    • Boiling water can cause burn injuries when splashed onto skin.

  4. How to Repair a Warped Sterling Silver Ring: passo 4, immagine 1 di 1
    • Release the grip on the ring, and let the ring sit at the bottom of the pot.

    • Remove the tongs from the pot and set them aside.

    • Boil the ring in the water for 5 minutes.

  5. How to Repair a Warped Sterling Silver Ring: passo 5, immagine 1 di 2 How to Repair a Warped Sterling Silver Ring: passo 5, immagine 2 di 2
    • After 5 minutes, remove the ring from the boiling water using tongs.

    • Place the ring on a paper towel for 5 minutes to cool the metal.

    • The metal of the ring will be hot and can burn your skin.

  6. How to Repair a Warped Sterling Silver Ring: passo 6, immagine 1 di 3 How to Repair a Warped Sterling Silver Ring: passo 6, immagine 2 di 3 How to Repair a Warped Sterling Silver Ring: passo 6, immagine 3 di 3
    • Place the warped ring on a metal mandrel.

    • Pull the ring down the mandrel to the desired ring size.

    • Our desired ring size was a size 8.

  7. How to Repair a Warped Sterling Silver Ring: passo 7, immagine 1 di 3 How to Repair a Warped Sterling Silver Ring: passo 7, immagine 2 di 3 How to Repair a Warped Sterling Silver Ring: passo 7, immagine 3 di 3
    • Use a rubber mallet to gently pound the ring band until it is round again.

    • Be careful with your fingers while using the mallet.

    • Rotate the ring to check that it is round and smooth.

    • Pull the ring off the mandrel.

  8. How to Repair a Warped Sterling Silver Ring: passo 8, immagine 1 di 1
    • Place the restored ring on your desired finger.

Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 40

Tutti i Tempi: 173