8bitDo Ultimate C 2.4g Wireless Controller Battery Replacement

Introduzione

A common issue with gaming controllers is the deterioration of the internal battery. Whether it's due to the passing of time or internal damage, there's no doubt that a faulty battery can contribute to an unenjoyable gaming experience. Our guide aims to tackle this issue by offering a comprehensive solution. Our step-by-step approach will guide users through the process of replacing an 8bitDo Ultimate C 2.4g Wireless controller battery, providing them with the knowledge to perform the replacement by themselves.

Cosa ti serve

Passo 1 Battery

8bitDo Ultimate C 2.4g Wireless Controller Battery Replacement, Battery: passo 1, immagine 1 di 3

8bitDo Ultimate C 2.4g Wireless Controller Battery Replacement, Battery: passo 1, immagine 2 di 3

8bitDo Ultimate C 2.4g Wireless Controller Battery Replacement, Battery: passo 1, immagine 3 di 3

Remove the four screws from the back cover of the controller using a T6 Torx screwdriver.

Modifica

Passo 2

8bitDo Ultimate C 2.4g Wireless Controller Battery Replacement: passo 2, immagine 3 di 3

Insert a Jimmy into the crevice of one of the controller's bottom grips and use it to follow the lining of the crevice around the whole controller.
Opting for a plastic wedge instead of other metal tools may be a more practical choice. Metal tools may bend and cause cosmetic damage.

Modifica

Passo 3

8bitDo Ultimate C 2.4g Wireless Controller Battery Replacement: passo 3, immagine 3 di 3

Gently separate the front and back casing of the controller to expose the battery.

Modifica

Passo 4

8bitDo Ultimate C 2.4g Wireless Controller Battery Replacement: passo 4, immagine 3 di 3

Gently grab the white plastic front of the wire that is connected to the motherboard to detach it from its plug.
Be sure to only unplug the wire that connects the battery to the motherboard. No other wire needs to be unplugged for this specific replacement.

Modifica

Passo 5

8bitDo Ultimate C 2.4g Wireless Controller Battery Replacement: passo 5, immagine 3 di 3

Remove the battery from its position.
There will be adhesive at the back of the battery that may raise concern. However, removing the battery will not damage it or the controller.

Modifica

Passo 6

Apply the iFixit stretch release adhesive to the back of the replacement battery and place the new battery in the same spot as the old one.
Make sure to plug in the new battery's wire into the controller's motherboard.

Modifica